_                               _  _____, / ____, __ _ _ __ __ ___   _____, (___, / _`, '__/ _` \ \ / / _ \, \___ \, ___, (_, (_, \ V /  __/, ____), ______\__,_, _, \__,_, \_/ \___, _, _____/ 
                                           

?LaravelS is like a glue that is used to quickly integrate Swoole into Laravel or Lumen, and then give them better performance and more possibilities.

Please Watch this repository to get the latest updates.

中文文档

Table of Contents

• Features
• Requirements
• Install
• Run
• Deploy
• Cooperate with Nginx (Recommended)
• Cooperate with Apache
• Enable WebSocket server
• Listen events
  • System events
  • Customized asynchronous events
• Asynchronous task queue
• Millisecond cron job
• Reload automatically when code is modified
• Get the instance of SwooleServer in your project
• Use SwooleTable
• Multi-port mixed protocol
• Coroutine
• Custom process
• Other features
• Important notices
• Users and cases
• Alternatives
• Support Us
• License

Features

• Built-in Http/WebSocket server

• Multi-port mixed protocol

• Coroutine

• Custom process

• Memory resident

• Asynchronous event listening

• Asynchronous task queue

• Millisecond cron job

• Gracefully reload

• Reload automatically when code is modified

• Support Laravel/Lumen both, good compatibility

• Simple & Out of the box

Requirements, Dependency, Requirement, --------, --------, PHP, >= 5.5.9 Recommend PHP7+, Swoole, >= 1.7.19 No longer support PHP5 since 2.0.12 Recommend 4.2.3+, Laravel/Lumen, >= 5.1 Recommend 5.6+, ## Install

1.Require package via Composer(packagist).

composer require "hhxsv5/laravel-s:~3.6.0" -vvv
# Make sure that your composer.lock file is under the VCS

2.Register service provider(pick one of two).

• Laravel: in config/app.php file, Laravel 5.5+ supports package discovery automatically, you should skip this step

  'providers' => [
      //...
      Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class,
  ],
  

• Lumen: in bootstrap/app.php file

  $app->register(Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class);
  

3.Publish configuration and binaries.

After upgrading LaravelS, you need to republish; click here to see the change notes of each version.

php artisan laravels publish
# Configuration: config/laravels.php
# Binary: bin/laravels bin/fswatch bin/inotify

4.Change config/laravels.php: listen_ip, listen_port, refer Settings.

Run

Please read the notices carefully before running, Important notices(IMPORTANT).

• Commands: php bin/laravels {start, stop, restart, reload, info, help}., Command, Description, ---------, ---------, start, Start LaravelS, list the processes by "ps -ef|grep laravels". Support the option "-d|--daemonize" to run as a daemon; Support the option "-e|--env" to specify the environment to run, such as --env=testing will use the configuration file .env.testing firstly, this feature requires Laravel 5.2+, stop, Stop LaravelS, restart, Restart LaravelS, support the options "-d|--daemonize" and "-e|--env", reload, Reload all Task/Worker/Timer processes which contain your business codes, and trigger the method onReload of Custom process, CANNOT reload Master/Manger processes. After modifying config/laravels.php, you can only call restart to restart, info, Display component version information, help, Display help information, - Runtime files: start will automatically execute artisan laravels config and generate these files, developers generally don't need to pay attention to them, it's recommended to add them to .gitignore., File, Description, ---------, ---------, storage/laravels.json, LaravelS's runtime configuration file, storage/laravels.pid, PID file of Master process, storage/laravels-timer-process.pid, PID file of the Timer process, storage/laravels-custom-processes.pid, PID file of all custom processes, ## Deploy

It is recommended to supervise the main process through Supervisord, the premise is without option -d and to set swoole.daemonize to false.

[program:laravel-s-test]
directory=/var/wwww/laravel-s-test
command=/usr/local/bin/php bin/laravels start -i
numprocs=1
autostart=true
autorestart=true
startretries=3
user=www-data
redirect_stderr=true
stdout_logfile=/var/log/supervisor/%(program_name)s.log

Cooperate with Nginx (Recommended)

Demo.

gzip on;
gzip_min_length 1024;
gzip_comp_level 2;
gzip_types text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml;
gzip_vary on;
gzip_disable "msie6";
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/xxxpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /xxxpath/laravel-s-test/public;
    access_log /yyypath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 120s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_pass http://swoole;
    }
}

Cooperate with Apache

LoadModule proxy_module /yyypath/modules/mod_deflate.so
<IfModule deflate_module>
    SetOutputFilter DEFLATE
    DeflateCompressionLevel 2
    AddOutputFilterByType DEFLATE text/html text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml
</IfModule>

<VirtualHost *:80>
    # Don't forget to bind the host
    ServerName www.laravels.com
    ServerAdmin hhxsv5@sina.com

    DocumentRoot /xxxpath/laravel-s-test/public;
    DirectoryIndex index.html index.htm
    <Directory "/">
        AllowOverride None
        Require all granted
    </Directory>

    LoadModule proxy_module /yyypath/modules/mod_proxy.so
    LoadModule proxy_module /yyypath/modules/mod_proxy_balancer.so
    LoadModule proxy_module /yyypath/modules/mod_lbmethod_byrequests.so
    LoadModule proxy_module /yyypath/modules/mod_proxy_http.so
    LoadModule proxy_module /yyypath/modules/mod_slotmem_shm.so
    LoadModule proxy_module /yyypath/modules/mod_rewrite.so

    ProxyRequests Off
    ProxyPreserveHost On
    <Proxy balancer://laravels>  
        BalancerMember http://192.168.1.1:5200 loadfactor=7
        #BalancerMember http://192.168.1.2:5200 loadfactor=3
        #BalancerMember http://192.168.1.3:5200 loadfactor=1 status=+H
        ProxySet lbmethod=byrequests
    </Proxy>
    #ProxyPass / balancer://laravels/
    #ProxyPassReverse / balancer://laravels/

    # Apache handles the static resources, LaravelS handles the dynamic resource.
    RewriteEngine On
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-d
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-f
    RewriteRule ^/(.*)$ balancer://laravels/%{REQUEST_URI} [P,L]

    ErrorLog ${APACHE_LOG_DIR}/www.laravels.com.error.log
    CustomLog ${APACHE_LOG_DIR}/www.laravels.com.access.log combined
</VirtualHost>

Enable WebSocket server

The Listening address of WebSocket Sever is the same as Http Server.

1.Create WebSocket Handler class, and implement interface WebSocketHandlerInterface.The instant is automatically instantiated when start, you do not need to manually create it.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
/**
 * @see https://www.swoole.co.uk/docs/modules/swoole-websocket-server
 */
class WebSocketService implements WebSocketHandlerInterface
{
    // Declare constructor without parameters
    public function __construct()
    {
    }
    public function onOpen(Server $server, Request $request)
    {
        // Before the onOpen event is triggered, the HTTP request to establish the WebSocket has passed the Laravel route, 
        // so Laravel's Request, Auth information is readable, and Session is readable and writable, but only in the onOpen event.
        // \Log::info('New WebSocket connection', [$request->fd, request()->all(), session()->getId(), session('xxx'), session(['yyy' => time()])]);
        $server->push($request->fd, 'Welcome to LaravelS');
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // \Log::info('Received message', [$frame->fd, $frame->data, $frame->opcode, $frame->finish]);
        $server->push($frame->fd, date('Y-m-d H:i:s'));
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
    }
}

2.Modify config/laravels.php.

// ...
'websocket'      => [
    'enable'  => true, // Here is true
    'handler' => \App\Services\WebSocketService::class,
],
'swoole'         => [
    //...
    // Must set dispatch_mode in (2, 4, 5), see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
    'dispatch_mode' => 2,
    //...
],
// ...

3.Use SwooleTable to bind FD & UserId, optional, Swoole Table Demo. Also you can use the other global storage services, like Redis/Memcached/MySQL, but be careful that FD will be possible conflicting between multiple Swoole Servers.

4.Cooperate with Nginx (Recommended)

Refer WebSocket Proxy

map $http_upgrade $connection_upgrade {
    default upgrade;
    ''      close;
}
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/xxxpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /xxxpath/laravel-s-test/public;
    access_log /yyypath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    # Http and WebSocket are concomitant, Nginx identifies them by "location"
    # !!! The location of WebSocket is "/ws"
    # Javascript: var ws = new WebSocket("ws://laravels.com/ws");
    location =/ws {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout: Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds; At the same time, this close behavior is also affected by heartbeat setting of Swoole.
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $connection_upgrade;
        proxy_pass http://swoole;
    }
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_pass http://swoole;
    }
}

5.Heartbeat setting

• Heartbeat setting of Swoole

  // config/laravels.php
  'swoole' => [
      //...
      // All connections are traversed every 60 seconds. If a connection does not send any data to the server within 600 seconds, the connection will be forced to close.
      'heartbeat_idle_time'      => 600,
      'heartbeat_check_interval' => 60,
      //...
  ],
  

• Proxy read timeout of Nginx

  # Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds
  proxy_read_timeout 60s;
  

6.Push data in controller

namespace App\Http\Controllers;
class TestController extends Controller
{
    public function push()
    {
        $fd = 1; // Find fd by userId from a map [userId=>fd].
        /**@var \Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        $success = $swoole->push($fd, 'Push data to fd#1 in Controller');
        var_dump($success);
    }
}

Listen events

System events

Usually, you can reset/destroy some global/static variables, or change the current Request/Response object.

• laravels.received_request After LaravelS parsed Swoole\Http\Request to Illuminate\Http\Request, before Laravel's Kernel handles this request.

  // Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
  // If no variable $events, you can also call Facade \Event::listen(). 
  $events->listen('laravels.received_request', function (\Illuminate\Http\Request $req, $app) {
      $req->query->set('get_key', 'hhxsv5');// Change query of request
      $req->request->set('post_key', 'hhxsv5'); // Change post of request
  });
  

• laravels.generated_response After Laravel's Kernel handled the request, before LaravelS parses Illuminate\Http\Response to Swoole\Http\Response.

  // Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
  // If no variable $events, you can also call Facade \Event::listen(). 
  $events->listen('laravels.generated_response', function (\Illuminate\Http\Request $req, \Symfony\Component\HttpFoundation\Response $rsp, $app) {
      $rsp->headers->set('header-key', 'hhxsv5');// Change header of response
  });
  

Customized asynchronous events

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of asynchronous event processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create event class.

use Hhxsv5\LaravelS\Swoole\Task\Event;
class TestEvent extends Event
{
    private $data;
    public function __construct($data)
    {
        $this->data = $data;
    }
    public function getData()
    {
        return $this->data;
    }
}

2.Create listener class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Task\Event;
use Hhxsv5\LaravelS\Swoole\Task\Listener;
class TestListener1 extends Listener
{
    // Declare constructor without parameters
    public function __construct()
    {
    }
    public function handle(Event $event)
    {
        \Log::info(__CLASS__ . ':handle start', [$event->getData()]);
        sleep(2);// Simulate the slow codes
        // Deliver task in CronJob, but NOT support callback finish() of task.
        // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
        $ret = Task::deliver(new TestTask('task data'));
        var_dump($ret);
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
    }
}

3.Bind event & listeners.

// Bind event & listeners in file "config/laravels.php", one event => many listeners
[
    // ...
    'events' => [
        \App\Tasks\TestEvent::class => [
            \App\Tasks\TestListener1::class,
            //\App\Tasks\TestListener2::class,
        ],
    ],
    // ...
];

4.Fire event.

// Create instance of event and fire it, "fire" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Event;
$event = new TestEvent('event data');
// $event->delay(10); // Delay 10 seconds to fire event
// $event->setTries(3); // When an error occurs, try 3 times in total
$success = Event::fire($event);
var_dump($success);// Return true if sucess, otherwise false

Asynchronous task queue

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of task processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create task class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
class TestTask extends Task
{
    private $data;
    private $result;
    public function __construct($data)
    {
        $this->data = $data;
    }
    // The logic of task handling, run in task process, CAN NOT deliver task
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->data]);
        sleep(2);// Simulate the slow codes
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
        $this->result = 'the result of ' . $this->data;
    }
    // Optional, finish event, the logic of after task handling, run in worker process, CAN deliver task 
    public function finish()
    {
        \Log::info(__CLASS__ . ':finish start', [$this->result]);
        Task::deliver(new TestTask2('task2 data')); // Deliver the other task
    }
}

2.Deliver task.

// Create instance of TestTask and deliver it, "deliver" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Task;
$task = new TestTask('task data');
// $task->delay(3);// delay 3 seconds to deliver task
// $task->setTries(3); // When an error occurs, try 3 times in total
$ret = Task::deliver($task);
var_dump($ret);// Return true if sucess, otherwise false

Millisecond cron job

Wrapper cron job base on Swoole's Millisecond Timer, replace Linux Crontab.

1.Create cron job class.

namespace App\Jobs\Timer;
use App\Tasks\TestTask;
use Swoole\Coroutine;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Timer\CronJob;
class TestCronJob extends CronJob
{
    protected $i = 0;
    // !!! The `interval` and `isImmediate` of cron job can be configured in two ways(pick one of two): one is to overload the corresponding method, and the other is to pass parameters when registering cron job.
    // --- Override the corresponding method to return the configuration: begin
    public function interval()
    {
        return 1000;// Run every 1000ms
    }
    public function isImmediate()
    {
        return false;// Whether to trigger `run` immediately after setting up
    }
    // --- Override the corresponding method to return the configuration: end
    public function run()
    {
        \Log::info(__METHOD__, ['start', $this->i, microtime(true)]);
        // do something
        // sleep(1); // Swoole < 2.1
        Coroutine::sleep(1); // Swoole>=2.1 Coroutine will be automatically created for run().
        $this->i++;
        \Log::info(__METHOD__, ['end', $this->i, microtime(true)]);

        if ($this->i >= 10) { // Run 10 times only
            \Log::info(__METHOD__, ['stop', $this->i, microtime(true)]);
            $this->stop(); // Stop this cron job
            // Deliver task in CronJob, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
        }
        // throw new \Exception('an exception');// all exceptions will be ignored, then record them into Swoole log, you need to try/catch them
    }
}

2.Register cron job.

// Register cron jobs in file "config/laravels.php"
[
    // ...
    'timer'          => [
        'enable' => true, // Enable Timer
        'jobs'   => [ // The list of cron job
            // Enable LaravelScheduleJob to run `php artisan schedule:run` every 1 minute, replace Linux Crontab
            // \Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob::class,
            // Two ways to configure parameters:
            // [\App\Jobs\Timer\TestCronJob::class, [1000, true]], // Pass in parameters when registering
            \App\Jobs\Timer\TestCronJob::class, // Override the corresponding method to return the configuration
        ],
        'max_wait_time' => 5, // Max waiting time of reloading
    ],
    // ...
];

3.Note: it will launch multiple timers when build the server cluster, so you need to make sure that launch one timer only to avoid running repetitive task.

4.LaravelS v3.4.0 starts to support the hot restart [Reload] Timer process. After LaravelS receives the SIGUSR1 signal, it waits for max_wait_time(default 5) seconds to end the process, then the Manager process will pull up the Timer process again.

Reload automatically when code is modified

• Via inotify, support Linux only.

  1.Install inotify extension.

  2.Turn on the switch in Settings.

  3.Notice: Modify the file only in Linux to receive the file change events. It's recommended to use the latest Docker. Vagrant Solution.

• Via fswatch, support OS X/Linux/Windows.

  1.Install fswatch.

  2.Run command in your project root directory.

  # Watch current directory
  ./bin/fswatch
  # Watch app directory
  ./bin/fswatch ./app
  

• Via inotifywait, support Linux.

  1.Install inotify-tools.

  2.Run command in your project root directory.

  # Watch current directory
  ./bin/inotify
  # Watch app directory
  ./bin/inotify ./app
  

• When the above methods does not work, the ultimate solution: set max_request=1,worker_num=1, so that Worker process will restart after processing a request. The performance of this method is very poor, so only development environment use.

Get the instance of SwooleServer in your project

/**
 * $swoole is the instance of `Swoole\WebSocket\Server` if enable WebSocket server, otherwise `Swoole\Http\Server`
 * @var \Swoole\WebSocket\Server, \Swoole\Http\Server $swoole
 */
$swoole = app('swoole');
var_dump($swoole->stats());// Singleton

Use SwooleTable

1.Define Table, support multiple.

All defined tables will be created before Swoole starting.

// in file "config/laravels.php"
[
    // ...
    'swoole_tables'  => [
        // Scene：bind UserId & FD in WebSocket
        'ws' => [// The Key is table name, will add suffix "Table" to avoid naming conflicts. Here defined a table named "wsTable"
            'size'   => 102400,// The max size
            'column' => [// Define the columns
                ['name' => 'value', 'type' => \Swoole\Table::TYPE_INT, 'size' => 8],
            ],
        ],
        //...Define the other tables
    ],
    // ...
];

2.Access Table: all table instances will be bound on SwooleServer, access by app('swoole')->xxxTable.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebsocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
class WebSocketService implements WebSocketHandlerInterface
{
    /**@var \Swoole\Table $wsTable */
    private $wsTable;
    public function __construct()
    {
        $this->wsTable = app('swoole')->wsTable;
    }
    // Scene：bind UserId & FD in WebSocket
    public function onOpen(Server $server, Request $request)
    {
        // var_dump(app('swoole') === $server);// The same instance
        /**
         * Get the currently logged in user
         * This feature requires that the path to establish a WebSocket connection go through middleware such as Authenticate.
         * E.g:
         * Browser side: var ws = new WebSocket("ws://127.0.0.1:5200/ws");
         * Then the /ws route in Laravel needs to add the middleware like Authenticate.
         */
        // $user = Auth::user();
        // $userId = $user ? $user->id : 0; // 0 means a guest user who is not logged in
        $userId = mt_rand(1000, 10000);
        $this->wsTable->set('uid:' . $userId, ['value' => $request->fd]);// Bind map uid to fd
        $this->wsTable->set('fd:' . $request->fd, ['value' => $userId]);// Bind map fd to uid
        $server->push($request->fd, "Welcome to LaravelS #{$request->fd}");
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // Broadcast
        foreach ($this->wsTable as $key => $row) {
            if (strpos($key, 'uid:') === 0 && $server->isEstablished($row['value'])) {
                $content = sprintf('Broadcast: new message "%s" from #%d', $frame->data, $frame->fd);
                $server->push($row['value'], $content);
            }
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        $uid = $this->wsTable->get('fd:' . $fd);
        if ($uid !== false) {
            $this->wsTable->del('uid:' . $uid['value']); // Unbind uid map
        }
        $this->wsTable->del('fd:' . $fd);// Unbind fd map
        $server->push($fd, "Goodbye #{$fd}");
    }
}

Multi-port mixed protocol

For more information, please refer to Swoole Server AddListener

To make our main server support more protocols not just Http and WebSocket, we bring the feature multi-port mixed protocol of Swoole in LaravelS and name it Socket. Now, you can build TCP/UDP applications easily on top of Laravel.

1. Create socket handler class, and extend Hhxsv5\LaravelS\Swoole\Socket\{TcpSocket, UdpSocket, Http, WebSocket}.

   namespace App\Sockets;
   use Hhxsv5\LaravelS\Swoole\Socket\TcpSocket;
   use Swoole\Server;
   class TestTcpSocket extends TcpSocket
   {
       public function onConnect(Server $server, $fd, $reactorId)
       {
           \Log::info('New TCP connection', [$fd]);
           $server->send($fd, 'Welcome to LaravelS.');
       }
       public function onReceive(Server $server, $fd, $reactorId, $data)
       {
           \Log::info('Received data', [$fd, $data]);
           $server->send($fd, 'LaravelS: ' . $data);
           if ($data === "quit\r\n") {
               $server->send($fd, 'LaravelS: bye' . PHP_EOL);
               $server->close($fd);
           }
       }
       public function onClose(Server $server, $fd, $reactorId)
       {
           \Log::info('Close TCP connection', [$fd]);
           $server->send($fd, 'Goodbye');
       }
   }
   

   These Socket connections share the same worker processes with your HTTP/WebSocket connections. So it won't be a problem at all if you want to deliver tasks, use SwooleTable, even Laravel components such as DB, Eloquent and so on.
   At the same time, you can access Swoole\Server\Port object directly by member property swoolePort.

   public function onReceive(Server $server, $fd, $reactorId, $data)
   {
       $port = $this->swoolePort; //There you go
   }
   

2. Register Sockets.

   // Edit `config/laravels.php`
   //...
   'sockets' => [
       [
           'host'     => '127.0.0.1',
           'port'     => 5291,
           'type'     => SWOOLE_SOCK_TCP,// Socket type: SWOOLE_SOCK_TCP/SWOOLE_SOCK_TCP6/SWOOLE_SOCK_UDP/SWOOLE_SOCK_UDP6/SWOOLE_UNIX_DGRAM/SWOOLE_UNIX_STREAM
           'settings' => [// Swoole settings：https://www.swoole.co.uk/docs/modules/swoole-server-methods#swoole_server-addlistener
               'open_eof_check' => true,
               'package_eof'    => "\r\n",
           ],
           'handler'  => \App\Sockets\TestTcpSocket::class,
       ],
   ],
   

   About the heartbeat configuration, it can only be set on the main server and cannot be configured on Socket, but the Socket inherits the heartbeat configuration of the main server.

   For TCP socket, onConnect and onClose events will be blocked when dispatch_mode of Swoole is 1/3, so if you want to unblock these two events please set dispatch_mode to 2/4/5.

   'swoole' => [
       //...
       'dispatch_mode' => 2,
       //...
   ];
   

3. Test.

• TCP: telnet 127.0.0.1 5291

• UDP: [Linux] echo "Hello LaravelS" > /dev/udp/127.0.0.1/5292

4. Register example of other protocols.

   • UDP

   'sockets' => [
       [
           'host'     => '0.0.0.0',
           'port'     => 5292,
           'type'     => SWOOLE_SOCK_UDP,
           'settings' => [
               'open_eof_check' => true,
               'package_eof'    => "\r\n",
           ],
           'handler'  => \App\Sockets\TestUdpSocket::class,
       ],
   ],
   

   • Http

   'sockets' => [
       [
           'host'     => '0.0.0.0',
           'port'     => 5293,
           'type'     => SWOOLE_SOCK_TCP,
           'settings' => [
               'open_http_protocol' => true,
           ],
           'handler'  => \App\Sockets\TestHttp::class,
       ],
   ],
   

   • WebSocket: The main server must turn on WebSocket, that is, set websocket.enable to true.

   'sockets' => [
       [
           'host'     => '0.0.0.0',
           'port'     => 5294,
           'type'     => SWOOLE_SOCK_TCP,
           'settings' => [
               'open_http_protocol'      => true,
               'open_websocket_protocol' => true,
           ],
           'handler'  => \App\Sockets\TestWebSocket::class,
       ],
   ],
   

Coroutine

Swoole Coroutine

• Warning: The order of code execution in the coroutine is out of order. The data of the request level should be isolated by the coroutine ID. However, there are many singleton and static attributes in Laravel/Lumen, the data between different requests will affect each other, it's Unsafe. For example, the database connection is a singleton, the same database connection shares the same PDO resource. This is fine in the synchronous blocking mode, but it does not work in the asynchronous coroutine mode. Each query needs to create different connections and maintain IO state of different connections, which requires a connection pool. So DO NOT enable the coroutine, only the custom process can use the coroutine.

• Enable Coroutine, default disable.

  // Edit `config/laravels.php`
  [
      //...
      'swoole' => [
          //...
          'enable_coroutine' => true
       ],
  ]
  

• Coroutine Client: require Swoole>=2.0.

• Runtime Coroutine: require Swoole>=4.1.0, and enable it.

  // Edit `config/laravels.php`
  [
      //...
      'enable_coroutine_runtime' => true
      //...
  ]
  

Custom process

Support developers to create special work processes for monitoring, reporting, or other special tasks. Refer addProcess.

1. Create Proccess class, implements CustomProcessInterface.

   namespace App\Processes;
   use App\Tasks\TestTask;
   use Hhxsv5\LaravelS\Swoole\Process\CustomProcessInterface;
   use Hhxsv5\LaravelS\Swoole\Task\Task;
   use Swoole\Coroutine;
   use Swoole\Http\Server;
   use Swoole\Process;
   class TestProcess implements CustomProcessInterface
   {
       /**
        * @var bool Quit tag for Reload updates
        */
       private static $quit = false;
   
       public static function callback(Server $swoole, Process $process)
       {
           // The callback method cannot exit. Once exited, Manager process will automatically create the process 
           while (!self::$quit) {
               \Log::info('Test process: running');
               // sleep(1); // Swoole < 2.1
               Coroutine::sleep(1); // Swoole>=2.1: Coroutine & Runtime will be automatically enabled for callback().
                // Deliver task in custom process, but NOT support callback finish() of task.
               // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
               $ret = Task::deliver(new TestTask('task data'));
               var_dump($ret);
               // The upper layer will catch the exception thrown in the callback and record it in the Swoole log, and then this process will exit. The Manager process will re-create the process after 3 seconds, so developers need to try / catch to catch the exception by themselves to avoid frequent process creation.
               // throw new \Exception('an exception');
           }
       }
       // Requirements: LaravelS >= v3.4.0 & callback() must be async non-blocking program.
       public static function onReload(Server $swoole, Process $process)
       {
           // Stop the process...
           // Then end process
           \Log::info('Test process: reloading');
           self::$quit = true;
           // $process->exit(0); // Force exit process
       }
   }
   

2. Register TestProcess.

   // Edit `config/laravels.php`
   // ...
   'processes' => [
       'test' => [ // Key name is process name
           'class'    => \App\Processes\TestProcess::class,
           'redirect' => false, // Whether redirect stdin/stdout, true or false
           'pipe'     => 0,     // The type of pipeline, 0: no pipeline 1: SOCK_STREAM 2: SOCK_DGRAM
           'enable'   => true,  // Whether to enable, default true
           //'queue'    => [ // Enable message queue as inter-process communication, configure empty array means use default parameters
           //    'msg_key'  => 0,    // The key of the message queue. Default: ftok(__FILE__, 1).
           //    'mode'     => 2,    // Communication mode, default is 2, which means contention mode
           //    'capacity' => 8192, // The length of a single message, is limited by the operating system kernel parameters. The default is 8192, and the maximum is 65536
           //],
       ],
   ],
   

3. Note: The callback() cannot quit. If quit, the Manager process will re-create the process.

4. Example: Write data to a custom process.

   // config/laravels.php
   'processes' => [
       'test' => [
           'class'    => \App\Processes\TestProcess::class,
           'redirect' => false,
           'pipe'     => 1,
       ],
   ],
   

   // app/Processes/TestProcess.php
   public static function callback(Server $swoole, Process $process)
   {
       while ($data = $process->read()) {
           \Log::info('TestProcess: read data', [$data]);
           $process->write('TestProcess: ' . $data);
       }
   }
   

   // app/Http/Controllers/TestController.php
   public function testProcessWrite()
   {
       /**@var \Swoole\Process $process */
       $process = app('swoole')->customProcesses['test'];
       $process->write('TestController: write data' . time());
       var_dump($pushProcess->read());
   }
   

Other features

Configuring the event callback function of Swoole

Supported events:, Event, Interface, When happened, --------, --------, --------, ServerStart, Hhxsv5\LaravelS\Swoole\Events\ServerStartInterface, Occurs when the Master process is starting, this event should not handle complex business logic, and can only do some simple work of initialization., ServerStop, Hhxsv5\LaravelS\Swoole\Events\ServerStopInterface, Occurs when the server exits normally, CANNOT use async or coroutine related APIs in this event., WorkerStart, Hhxsv5\LaravelS\Swoole\Events\WorkerStartInterface, Occurs after the Worker/Task process is started, and the Laravel initialization has been completed., WorkerStop, Hhxsv5\LaravelS\Swoole\Events\WorkerStopInterface, Occurs after the Worker/Task process exits normally, WorkerError, Hhxsv5\LaravelS\Swoole\Events\WorkerErrorInterface, Occurs when an exception or fatal error occurs in the Worker/Task process, 1.Create an event class to implement the corresponding interface.

namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\ServerStartInterface;
use Swoole\Atomic;
use Swoole\Http\Server;
class ServerStartEvent implements ServerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server)
    {
        // Initialize a global counter (available across processes)
        $server->atomicCount = new Atomic(2233);

        // Invoked in controller: app('swoole')->atomicCount->get();
    }
}

namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\WorkerStartInterface;
use Swoole\Http\Server;
class WorkerStartEvent implements WorkerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server, $workerId)
    {
        // Initialize a database connection pool
        // DatabaseConnectionPool::init();
    }
}

2.Configuration.

// Edit `config/laravels.php`
'event_handlers' => [
    'ServerStart' => \App\Events\ServerStartEvent::class,
    'WorkerStart' => \App\Events\WorkerStartEvent::class,
],

Important notices

• Singleton Issue

  • Under FPM mode, singleton instances will be instantiated and recycled in every request, request start=>instantiate instance=>request end=>recycled instance.

  • Under Swoole Server, All singleton instances will be held in memory, different lifetime from FPM, request start=>instantiate instance=>request end=>do not recycle singleton instance. So need developer to maintain status of singleton instances in every request.

  • Common solutions:

    1. Write a XxxCleaner class to clean up the singleton object state. This class implements the interface Hhxsv5\LaravelS\Illuminate\Cleaners\CleanerInterface and then registers it in cleaners of laravels.php.

    2. Reset status of singleton instances by Middleware.

    3. Re-register ServiceProvider, add XxxServiceProvider into register_providers of file laravels.php. So that reinitialize singleton instances in every request Refer.

  • LaravelS has built in some cleaners.

• Known issues: a package of known issues and solutions.

• Debugging method: Logging, Laravel Dump Server(Laravel 5.7 has been integrated by default).

• Should get all request information from Illuminate\Http\Request Object, $_ENV is readable, $_SERVER is partially readable, CANNOT USE $_GET/$_POST/$_FILES/$_COOKIE/$_REQUEST/$_SESSION/$GLOBALS.

  public function form(\Illuminate\Http\Request $request)
  {
      $name = $request->input('name');
      $all = $request->all();
      $sessionId = $request->cookie('sessionId');
      $photo = $request->file('photo');
      // Call getContent() to get the raw POST body, instead of file_get_contents('php://input')
      $rawContent = $request->getContent();
      //...
  }
  

• Respond by Illuminate\Http\Response Object, compatible with echo/vardump()/print_r()，CANNOT USE functions dd()/exit()/die()/header()/setcookie()/http_response_code().

  public function json()
  {
      return response()->json(['time' => time()])->header('header1', 'value1')->withCookie('c1', 'v1');
  }
  

• The various singleton connections will be memory resident, recommend to enable persistent connection.

1. Database connection, it will reconnect automatically immediately after disconnect.

   // config/database.php
   //...
   'connections' => [
       'my_conn' => [
           'driver'    => 'mysql',
           'host'      => env('DB_MY_CONN_HOST', 'localhost'),
           'port'      => env('DB_MY_CONN_PORT', 3306),
           'database'  => env('DB_MY_CONN_DATABASE', 'forge'),
           'username'  => env('DB_MY_CONN_USERNAME', 'forge'),
           'password'  => env('DB_MY_CONN_PASSWORD', ''),
           'charset'   => 'utf8mb4',
           'collation' => 'utf8mb4_unicode_ci',
           'prefix'    => '',
           'strict'    => false,
           'options'   => [
               // Enable persistent connection
               \PDO::ATTR_PERSISTENT => true,
           ],
       ],
       //...
   ],
   //...
   

2. Redis connection, it won't reconnect automatically immediately after disconnect, and will throw an exception about lost connection, reconnect next time. You need to make sure that SELECT DB correctly before operating Redis every time.

   // config/database.php
   'redis' => [
           'client' => env('REDIS_CLIENT', 'phpredis'), // It is recommended to use phpredis for better performance.
           'default' => [
               'host'       => env('REDIS_HOST', 'localhost'),
               'password'   => env('REDIS_PASSWORD', null),
               'port'       => env('REDIS_PORT', 6379),
               'database'   => 0,
               'persistent' => true, // Enable persistent connection
           ],
       ],
   //...
   

• global, static variables which you declared are need to destroy(reset) manually.

• Infinitely appending element into static/global variable will lead to memory leak.

  // Some class
  class Test
  {
      public static $array = [];
      public static $string = '';
  }
  
  // Controller
  public function test(Request $req)
  {
      // Memory leak
      Test::$array[] = $req->input('param1');
      Test::$string .= $req->input('param2');
  }
  

• Linux kernel parameter adjustment

• Pressure test

Alternatives

• swooletw/laravel-swoole

Support us, Currency, Address, --------, --------, BTC, 3KX6LTJcbgiKKaHGC7zySVdMmFXvjikQ3U, ETH, 0xccab8324d33a978a7ac040049e09100029123d71, LTC, LPhrmK1ZvjnP3ckd9j6QQV7BvjzjrWyTes, USDT, 18dhqenUw3ib3QUzUxXJ1WdCa4tZus4cv3, ## License

MIT