0

16n

十六个音量控制器，一个小键盘，通过 USB 和插孔的 MIDI，输出 CV，输出 I2C。唷！「Sixteen faders, a Teensy, MIDI over USB and jack, CV out, and I2C out. Phew.」

Github repo
Main metrics
  • Owner: 16n-faderbank/16n
  • Platform: Embedded Systems
  • License:: Other
  • Category::
  • Topic:
  • Like:
    0
      Compare:

Github stars Tracking Chart

16n

很久以前，Sean Hellfritsch 和 Brian Crabtree 做了一个推子库。

16n 是该对象的修订版：它是开源的，随时可以让你制作、修改或魔改。

它目前的硬件版本是 1.34，固件版本是 2.1.0。

存储库内容

  • firmware 是 Teensy 的源代码。
  • electronics 是 PCB 的原理图和 gerber 文件。
  • panel 是顶部和底部面板的 SVG/DXF 文件。
  • build 是构建文件。
  • browser_test 是一个传统的测试网页，让你测试你的 16n。从 16n 2.0.0 开始，editor 应该是你调试 16n 的联络点。

每个目录中都有进一步的 README 文件供你阅读。

然而，你的第一个文档调用点应该是 Github Wiki。

16n 的细节

  • 16 个 60 毫米的推子
  • 16 个通过 USB-midi 的 CC
  • 16 个 通过 minijack midi 的 CC（有开关可以在不同标准之间切换）
  • 16 个 0-5V CV 输出接口，每个通道一个。
  • I2C：通过 TRS 的单声道 I2C 协议（尖端是 SDA，环形是 SCL），与 Monome Teletype 一起使用；另外，I2C MASTER 模式，与 Monome Ansible、ER-301、TXo 等一起使用（可能需要对连接设备进行固件修补或修改）。

电源来自左手边的 5V micro-usb 到 Teensy，或来自你的电脑。

切换开关允许你在 "Arturia/Novation"（尖端是电流源）和 "Korg/Makenoise"（环形是电流源）标准之间切换；板子上有这样的标签。

给我们一张照片，然后

用户指南

用户指南可以在 Wiki 上找到

BOM

在 wiki 上可以看到更多

构建指南

在 wiki 上查看更多内容

贡献

基于 Brian Crabtree 和 Sean Hellfritsch 的原创作品。

Minijack MIDI、I2C 电路和 CV 输出由 Tom Armitage 负责。

固件由 Brian Crabtree、Tom Armitage 和 Brendon Cassidy 制作。

许可证

面板和电子原理图/布局/gerber文件在 Creative Commons Attribution Share-Alike 4.0 下许可。

固件在 MIT 许可 下授权。


Main metrics

Overview
Name With Owner16n-faderbank/16n
Primary LanguageC++
Program languageC++ (Language Count: 3)
PlatformEmbedded Systems
License:Other
所有者活动
Created At2017-08-23 09:09:22
Pushed At2025-04-06 20:28:18
Last Commit At
Release Count10
Last Release Namev2.2.0 (Posted on )
First Release Namev1.26 (Posted on )
用户参与
Stargazers Count358
Watchers Count26
Fork Count59
Commits Count211
Has Issues Enabled
Issues Count53
Issue Open Count18
Pull Requests Count13
Pull Requests Open Count4
Pull Requests Close Count4
项目设置
Has Wiki Enabled
Is Archived
Is Fork
Is Locked
Is Mirror
Is Private

16n

Once upon a time, Sean Hellfritsch and Brian Crabtree made a faderbank.

16n is the revised version of that object: it is open-source and ready for you to make, modify, or hack.

It is currently at hardware version 1.34, firmware version 2.1.0.

Repository contents

  • firmware is the Teensy source code.
  • electronics is schematics and gerber files for the PCB.
  • panel is SVG/DXF files for top and bottom panels.
  • build is build documentation.
  • browser_test is a legacy test webpage to let you test your 16n. As of 16n 2.0.0, the editor should be your point of call for debugging your 16n.

Each directory has further README files in for you to read.

Your first point of call for documentation, however, should be the Github Wiki.

16n Details

  • 16 60mm faders
  • sixteen CCs over USB-midi
  • sixten CCs over minijack midi (with switch to swap between standards)
  • sixteen 0-5V CV output jacks, one per channel.
  • I2C: monome-style I2C protocol over TRS (tip is SDA, ring is SCL), works with Monome Teletype; also, I2C MASTER mode, works with monome Ansible, ER-301, TXo, etc (may require firmware patching or modification to connected device).

Power from 5V micro-usb into Teensy on left-hand side, or from your computer.

Toggle switch allows you to swap between 'Arturia/Novation' (tip is current source) and 'Korg/Makenoise' (ring is current source) standards; board is labelled such.

Give us a picture, then

User guide

The user guide can be found on the Wiki

BOM

See more on the wiki

Build Guide

See more on the wiki

Credits

Based on original work by Brian Crabtree and Sean Hellfritsch.
Minijack MIDI, I2C circuitry and CV outputs by Tom Armitage.
Firmware by Brian Crabtree, Tom Armitage, and Brendon Cassidy.

Licensing

Panels and electronic schematics/layouts/gerber files are licensed under
Creative Commons Attribution Share-Alike 4.0.

Firmware is licensed under the MIT License.