bluepill

Bluepill is a tool to run iOS tests in parallel using multiple simulators.

Motivation

LinkedIn created Bluepill to run its large iOS test suite in a reasonable amount of time. If you want the long story, read the blog post.

Features

• Running tests in parallel by using multiple simulators.
• Automatically packing tests into groups.
• Running tests in headless mode to reduce memory consumption.
• Generating a junit report after each test run.
• Reporting test running stats, including test running speed and environment robustness.
• Retrying when the Simulator hangs or crashes.

Usages

It is quick and easy to start using Bluepill!

• Get bluepill binary: build from source or use our releases. You can also get the binary from Homebrew.

$ brew install bluepill

• Build your app and test bundle. You must build-for-testing if you use xcodebuild in terminal.
• Run bluepill using the .xctestrun file generated by Xcode.

$ bluepill --xctestrun-path ./SampleAppTest_iphonesimulator10.3-x86_64.xctestrun -o ./output/

Alternatively, you can use a configuration file like the one below:

{
   "xctestrun-path": "./SampleAppTest_iphonesimulator10.3-x86_64.xctestrun", # Relative path or abs path
   "output-dir": "./build/" # Relative path or abs path
}

And run

$ bluepill -c config.json

Flags

A full list supported options are listed here., Config Arguments, Command Line Arguments, Explanation, Required, Default value, :----------------------:, :----------------------:, ------------------------------------------------------------------------------------, :--------:, :----------------:, app, -a, The path to the host application to execute (your .app), N, n/a, xctestrun-path, The path to the .xctestrun file that xcode leaves when you build-for-testing., Y, n/a, output-dir, -o, Directory where to put output log files (bluepill only), Y, n/a, config, -c, Read options from the specified configuration file instead of the command line, N, n/a, device, -d, On which device to run the app., N, iPhone 6, exclude, -x, Exclude a testcase in the set of tests to run (takes priority over include)., N, empty, headless, -H, Run in headless mode (no GUI)., N, off, clone-simulator, -L, Spawn simulator by clone from simulator template., N, off, xcode-path, -X, Path to xcode., N, xcode-select -p, include, -i, Include a testcase in the set of tests to run (unless specified in exclude)., N, all tests, list-tests, -l, Only list tests in bundle, N, false, num-sims, -n, Number of simulators to run in parallel. (bluepill only), N, 4, printf-config, -P, Print a configuration file suitable for passing back using the -c option., N, n/a, error-retries, -R, Number of times to recover from simulator/app crashing/hanging and continue running, N, 5, failure-tolerance, -f, Number of times to retry on test failures, N, only-retry-failed, -F, When failure-tolerance > 0, only retry tests that failed, N, false, runtime, -r, What runtime to use., N, iOS 11.1, stuck-timeout, -S, Timeout in seconds for a test that seems stuck (no output)., N, 300s, test-timeout, -T, Timeout in seconds for a test that is producing output., N, 300s, test-bundle-path, -t, The path to the test bundle to execute (single .xctest)., N, n/a, additional-unit-xctests, n/a, Additional XCTest bundles that is not Plugin folder, N, n/a, additional-ui-xctests, n/a, Additional XCTUITest bundles that is not Plugin folder, N, n/a, repeat-count, -C, Number of times we'll run the entire test suite (used for load testing)., N, 1, no-split, -N, Test bundles you don't want to be packed into different groups to run in parallel., N, n/a, quiet, -q, Turn off all output except fatal errors., N, YES, diagnostics, n/a, Enable collection of diagnostics in outputDir in case of test failures, N, NO, help, -h, Help., N, n/a, runner-app-path, -u, The test runner for UI tests., N, n/a, screenshots-directory, n/a, Directory where simulator screenshots for failed ui tests will be stored, N, n/a, video-paths, -V, A list of videos that will be saved in the simulators, N, n/a, image-paths, -I, A list of images that will be saved in the simulators, N, n/a, ## Demo

Requirements

Bluepill only works with Xcode 11.2. If you're looking for old Xcode support, please check out the other branches:

• Xcode-8
• Xcode-9.0
• Xcode-9.1
• Xcode-9.2
• Xcode-9.3
• Xcode-9.4
• Xcode-10.0
• Xcode-10.1
• Xcode-10.2
• Xcode-10.3
• Xcode-11.0
• Xcode-11.1

Acknowledgement

Bluepill was inspired by parallel iOS test and Facebook’s xctool and FBSimulatorControl. The Bluepill icon was created by Maria Iu.

Fastlane Support

If you're using Fastlane to run your tests, you're in luck! You can integrate Bluepill into your project with very little change to your existing setup. Just integrate one of the following Fastlane plugins, and you'll be on your way:

• Redpill - The most up-to-date plugin; it's is maintained by Omni and offers a full set of options to hook into Bluepill. As of this writing, Redpill is compiled against Xcode 9.1, and intended for use with CircleCI. It will be updated with newer versions of Xcode when CircleCI supports them.
• fastlane-plugin-bluepill - Last updated Nov. 7th, offers basic support for working with the Bluepill binary.
• Bluepillar - Last updated May 29th, it's the original fastlane plugin for working with Bluepill. It was inspired by this blog post.
• XBluepill - Last updated Jan 27th. It supports all Bluepill options. Thera are some differences from other plugins:
  • Support XCode 9.2
  • No need to build your project before using the plugin. Builds you project by itself and put xctestrun file automatically;
  • Can reset all simulators if needed (removes all current simulators and recreates default from scratch);

Bitrise.io Support

If you're using Bitrise.io as your CI/CD, you can start using Bluepill immediately. Just add the Bluepill Build/Test for iOS step to your existing workflow. This open source step is maintained by HealthEngineAU and supports Xcode 8.3 and later.

Q & A

• Are we able to run Xcode UI Testing bundle with Bluepill

  YES, we recently added support for Xcode UI Testing bundles. Thanks to the inspiration from FBSimulatorControl. Bluepill now supports Xcode unit test bundle and UI test bundles.

• Easiest way to get Bluepill binary?

  Latest release.

• How to test Bluepill in Xcode

  Select BPSampleApp scheme and build it first. Then you can switch back to bluepill or bluepill-cli scheme to run their tests.

• How to get Bluepill binary from source?

  Run ./scripts/bluepill.sh build to test and build Bluepill. The binary will be output in the ./build folder.

• How to test my changes to Bluepill?

  Run ./scripts/bluepill.sh test.

• How to BUMP the max files and max procs to support running multiple simulators on macOS?

  Check - https://blog.dekstroza.io/ulimit-shenanigans-on-osx-el-capitan/